Aluminium Radiator Valves
Our aluminium radiator valves are oil- and vacuum tightened because of their O-Ring-sealing round the clap. The aluminium valves are manufactured in die-casting process and are available in 3 sizes (DN 76 / 80 / 100).
The aluminium casted valves are designed for mounting between flange of the transformer tank and radiator. The valve can be fixed to the transformer-flange with help of 4 special bolts with M 16 or UNC 5/8" thread. The same bolts are used to fix the radiator.
The aluminium casted valves are designed for mounting between flange of the transformer tank and radiator. The valve can be fixed to the transformer-flange with help of 4 special bolts with M 16 or UNC 5/8" thread. The same bolts are used to fix the radiator.
Characteristics of Aluminium Radiator Valve DN 76
The PCD of the flange is 125 mm.
There are grooves 84 x 5,6 x 3,9 for O-Rings on both sides of the valve-housing.
There are grooves 84 x 5,6 x 3,9 for O-Rings on both sides of the valve-housing.
Characteristics of Aluminium Radiator Valve DN 80
The PCD of the flange is 160 mm.
Dimensions correspond to DIN 42560.
There are grooves for O-Rings on both sides of the valve-housing.
There are grooves for O-Rings on both sides of the valve-housing.
NUT-Versions
- Groove 89 x 5,6 x 3,9 on both sides
- Groove 94,2 x 5,6 x 3,9 on both sides
- O-Rings out of HNBR for temperature range from -40°C till +150°C
Characteristics of Aluminium Radiator Valve DN 100
The PCD of the flange is 170 mm.
There are grooves 122 x 5,6 x 3,9 for O-Rings on both sides of the valve-housing.
Assembling Aluminium Radiator Valve
The integrated locking device is designed for locking the valve in opened or closed position.
The bolts can be supplied either with M 16 or UNC 5/8 "thread. The valve housing is tested against transformer oil at 200 kPa.
Please find below more detailed information of our aluminium radiator valves.
